Depick
.308 Win
So the recoil spring in my G43 doesn’t always stay fully seated in the notch on the barrel. I noticed when this happens the slide lock won’t fully operate. Is this normal ? Or should I be contacting Glock.
Glock 43 issue?
- Thread starter Depick
- Start date
GOYABEAN
.950 JDJ
Might be worn 
and are you centering in properly
and are you centering in properly
Saltwater60
20×102mm Vulcan
This can’t happen with a glock I thought they were perfect.
I’d call them and ask them. They are the experts on their pistol and who knows they may just send you a new recoil spring for free.
I’d call them and ask them. They are the experts on their pistol and who knows they may just send you a new recoil spring for free.
Depick
.308 Win
It has less than 100 rounds through it and yes I placed it properly in the notch.Might be worn
Depick
.308 Win
I’m gonna give them a call
GOYABEAN
.950 JDJ
Contact Glock
Celt
.450/400 Nitro Ex
I have a couple hundred through mine with no issues to date.
David D
.40 S&W
No problems with mine, over 500 rounds through it.
GOYABEAN
.950 JDJ
One of the PA forum members selling one $375 low round count 2mags he's
in Monroe county PA
in Monroe county PA
Celt
.450/400 Nitro Ex
Wanna take some pictures of it disassembled? Maybe we can see something wrong compared to functioning 43s.
Joe Blow
.45 acp
Have been through / shot / taken apart / put back together / upgraded many G43's... Never any issues...
Depick
.308 Win
Just rea
il post a couple tomorrow
Catskillkid
.450/400 Nitro Ex
No issues with mine. Not a ton of rounds through it yet though. I'd suggest contacting Glock if someone on here doesn't have an easy fix.
Doc8404
.450/400 Nitro Ex
Limp wristing
Doc8404
.450/400 Nitro Ex
Warrior: the storm kept ya home, didn't it!!!
Celt
.450/400 Nitro Ex
Ha, yep.. its been slow at work so its an easy day off.
Depick
.308 Win
libertysnake
.338 Win Mag
Mine is easy to knock out of the notch during reassembly, but once the slide is on and everything is in place, it operates 100% normally for me. Last time I took it to the range, I put about 100 rounds through it with no stoppages. Nothing bent, nothing obviously broken. I think it's just touchy to get it together, but solid once it is.
If it's happening during firing, then that's a problem. Contact them if that's the case.
Depick
.308 Win
Sometimes it if it’s really misaligned I won’t be able to operate the slide lock. But otherwise it functioned flawlessly.
libertysnake
.338 Win Mag
Wait, so you won't be able to operate the slide lock but it will fire ok? Or you won't be able to re-assmble / manipulate the slide lock during reassembly until it is seated properly?
If it operates fine once fully together, it's not immediately alarming. I'd maybe just check with Glock to see if it's known that it's a PITA to put it back together. Mine is a little finicky, but it does reassemble / fire fine.
Celt
.450/400 Nitro Ex
Strange, i took mine apart just a little bit ago and the recoil spring assembly was actually sitting just above the notch that its suppised to sit in. Now i dont know if i knocked it during disassembly or not so i put it back and racked the slide vigorously about 20 times then disassembled and it was sitting where it is supposed to. I did this two times with no change.
There is nothing I can see from the pictures that are different than mine so I'm not sure why the recoil spring is hopping out of the little Notch, but I would contact Glock as you don't want your life to depend on a gun that is not functioning properly.
There is nothing I can see from the pictures that are different than mine so I'm not sure why the recoil spring is hopping out of the little Notch, but I would contact Glock as you don't want your life to depend on a gun that is not functioning properly.
GOYABEAN
.950 JDJ
Is it just me put that recoil spring looks like it has a bend In it is stock maybe you need to upgrade to stainless
Depick
.308 Win
I think I’m just gonna call Glock. Better safe than sorry.
Eddie Gunks
.338 Win Mag
WTF are you all doing taking them apart?
Mine work fine. All of them.
I am not sure what you guys are doing to break them... but it is working!
Mine work fine. All of them.
I am not sure what you guys are doing to break them... but it is working!
Joe Blow
.45 acp
I don't get it either... A G42 / G43 (any Glock) field strip is pretty simple. Reassembly is, well, just the reverse...
libertysnake
.338 Win Mag
I suppose for some people it's like meeting a hot woman. They just need to get themselves inside as soon as possible.
Depick
.308 Win
Just sent Glock an email