Does anyone else use screwed up brass like me?

RooftopKorean

RooftopKorean

6.5 Creedmoor
First Responder
Messages
2,150
Reaction score
5,070
Location
Downstate / Lake Ariel, PA
When I get bored, I got thru my screwed up brass and turn them into key chains. Does anyone else do this?

I recently trimmed down a 45-70 casing (damaged from a bad press) to 1.6500 and dropped a bullet into it. Gonna drill out the primer and put in a in eye loop screw.

Just wondering if I'm the only other weirdo.

1000013297.jpg
 
Mosinitis

Mosinitis

.338 Win Mag
Messages
8,895
Reaction score
8,144
Location
NY state
I don't do this myself, but over the years accumulated the following.
Nickel plated bullet on the right gets a lot of use rounding deformed case mouths before sizing. The rest just sits on the bench taking up space.

IMG_20250608_181003.jpg
 
repete

repete

.338 Win Mag
Messages
6,327
Reaction score
9,572
Location
Rochester NY
I had plans, but they never materialized. Now I have several buckets of scrap brass from millions of primers, hundreds of keys and lots of empty cartridges. Someday I plan on a scrap run, will it materialize?
 
FP1201

FP1201

.338 Win Mag
Messages
7,676
Reaction score
12,630
Location
Adams, NY
Depends on how "screwed up" it really is...
I used to make .50BMG Dummy Rounds for give-a-ways: He had a Barrett and when someone would shoot it, he'd give them a souvenir round.
As mentioned above, I too have a five gallon bucket full of various calibers that needs processing, and if I ever get around to ordering a home smelter. I'd like to convert scrap into ingots. (anyone with a suggestion for one off amazon?)
 
Robin

Robin

.577 Tyrannosaur.
Messages
21,678
Reaction score
47,279
Location
Livingston County
I make lots of powder measures from them, from 30gr. on up. I use 30-06 empties to make file cleaners, hammer the mouth flat and run them along the grooves of the file teeth, cleans out all the foreign material prettifying easily.
Robin
 
T

tony

6.5 Creedmoor
Messages
2,124
Reaction score
2,322
Location
the dark side of the room
Robin said:
I use 30-06 empties to make file cleaners, hammer the mouth flat and run them along the grooves of the file teeth, cleans out all the foreign material prettifying easily.
Robin
Click to expand...
A file card is much much faster but then you'd have to find something else to do with the brass...

shopping.jpeg
 
Robin

Robin

.577 Tyrannosaur.
Messages
21,678
Reaction score
47,279
Location
Livingston County
tony said:
A file card is much much faster but then you'd have to find something else to do with the brass...

View attachment 268031
Click to expand...
If your file teeth are clogged with brass or mild steel that file will only do so much, the method I use cleans them completely and is relatively fast. Also, some of those file brushes have bristles that are as hard as or even harder than your file teeth, there by dulling them with every use.
Robin
 
T

tony

6.5 Creedmoor
Messages
2,124
Reaction score
2,322
Location
the dark side of the room
@Robin, I was a machinist / toolmaker at a large caliber cannon factory. I suppose I have used and discarded more files than the average person. A file card was an important tool in my bag of tricks. I've been retired for awhile and still use one regularly at home when metal cutting. Never thought about a file card wearing out a file as I have worn out a few file cards. Most files are at least RC 65 Rockwell hardness which is hard and brittle. I believe a file card to be softer...
 
repete

repete

.338 Win Mag
Messages
6,327
Reaction score
9,572
Location
Rochester NY
repete said:
I had plans, but they never materialized. Now I have several buckets of scrap brass from millions of primers, hundreds of keys and lots of empty cartridges. Someday I plan on a scrap run, will it materialize?
Click to expand...
I recently took my scrap brass in and got $287 for it! Not bad. Working out in the garage today, what do I find but a bunch more brass!
 
You must log in or register to reply here.
Top