There are so many videos, reports and independent studies about the P320 now only low IQ individuals or those that have for some reason invested an emotional stake into their purchasing decisions refuse to see the truth of the matter.
Well, I'm not talking about carry ammo. I have that sorted.
I'm talking about range ammo that shoots as well as my carry ammo but at a cheaper price.
I have heard a lot of good things about Atlanta Arms, when it comes tine fir an ammo purchase I will give their stuff a go.
I particularly like the largely traditional look with interspersed modern touches like the ring hammer and skeletonized trigger of #2. That is exactly what I want in a 1911 when it comes time for me to pick one up
I made a quick range trip earlier this week when the weather was especially nice, didn't snap any pics as it was a quick 30 minute session before going to work. On this particular trip I decided to rotate out some carry ammo, I shot whatever I had loaded up in all my mags on carry detail...
Who gives a shit about that miserable state?! I wish not one building permit was issued and I hope a continuous series of fires, floods and riots kills every kalifornian man, woman, and child. And then afterwards we export every other leftist in the nation to what has become a human garbage...
Technically it is a 3rd party research and testing firm that has been working with the FBI since the Miami-Dade thing for the purposes of firearms research.
This video throughly breaks it down.
These type of creatures are no better than rabid dogs. And as we do with rabid dogs creatures such as these need to be put down, removed from society permanently.
Same goes for their single mothers.
We must detoxify our culture, our nation, if we are to survive. The plain truth is that all...
CruWear is a very impressive steel. Good gadget retention but I am very impressed with it's toughness, the opposite of being chippy this stuff is. Last weekend I broke down a dozen cardboard boxes with no loss of sharpness however the abuse I have given it at work is more impressive- I have...
I generally strongly dislike slide cuts on the basis that they are extraneous decoration and they allow dust and debris a path inside the gun..............but for some reason I really like the cut on the Carry Comp, I'm not exactly sure why but I looks nice to me.
I doubt the Carry Comp is any...
Okay, if we are gonna start rooting for teams here.....
Look at that slide milling, those speed holes! There are custom guns that don't look that good.
That can be an issue with external compensators but not with ported barrels. I am prepared to except that the former is the more effective device but the latter doesn't really have any downside as to the function of the pistol, particularly when the ported section of the barrel is counterbored.
Well, if you are thinking of getting something more "modern" as you put it only do so if you want to, not because you think you need to because you don't. That said I tread down this very same path last year with an M&P Carry Comp with all the tactical goodies. In my case I sold off two other...
What else did you want?
Also I think this style comp, port or whatever you want to call it is probably the best way to do it for a carry/duty/bedside gun.
No hindrance to disassembly or function, very low profile and simple.
I am interested in this cartridge for being the 9x39 Grom we have at home although the 338 ARC seems the superior cartridge. A suppressed AR15 SBR in .338 ARC would be a lot of fun.
In terms of full power supersonics what kind of performance does this cartridge have compared to the big...
Then get a Romeo 4XT Pro and a good 3x magnifier then. That's what I'd get right now if I had a new rifle.
Good all-round setup. If you mix and match optic/magnifier brands, and you might because EoTech's magnifiers are probably the best, make sure the height of the optic mount and magnifier...
I suppose I should try again to reassemble my Mini Griptilian Custom. I have the replacement Omega springs. I tried putting back together once but I couldn't figure it out. I think I know a way now, its just a matter of finding the patience and desire to mess with it.
After that I'll...
Roving guards with shotguns. Anti-drone drones equipped with shotguns. Once again the scatter gun has risen from the grave and found a new role in the military. Also any kind of munition that be equipped with programmable electronic fuses. Might be time to dust off the old 25mm grenade...
I it is sharp. Very sharp from the factory and I honed the edge with ceramics. It is tissue paper slicing sharp. I cut myself from using my knife as a fidget gadget as I am wont to do with a new blade, blade came down of the tip of my finger as I flicked it shut. The steel seems fine, so far...
I'm absolutely fine and am in fact desirous of detaching Isreal from our hip.
I wish Isreal no ill will but I am tired of getting dragged into their bullshit over and over again. The Palestinians can go fuck themselves too, I have zero sympathy for those rats
I have seen headlines that the cease-fire lasted 12 minutes, I have seen headlines that the "fragile cease-fire is holding"
Just what the hell is going on over there?!
Trump is right, they really don't know what the fuck they are doing over there.
Is the cease-fire still holding up? Or is Iran back to getting exploded?
To be clear I don't give two half shits about Iran or its people, I just don't want us to be involved.
Deport all the Muslim diaspora back to the middle east and cordon off the whole region escape from NY style I say. Let...
I really, really, really hope this cease-fire turns into a hostilities ended situation.
However the cease-fire in Ukraine didn't hold, the Israeli-Palestinian cease-fire didn't hold why would this one?
If annihilating Iran's nuclear facilities through a freakin' mountain is the extra inducement...
So I bring up my three deceased comrades and you say, to my face, they had it coming. I ask you; what kind of man lets that slide? Not this man, I can tell you that much.
Broken and killed for nothing all the wwrld's politicians are as degenerate gambler addicts and the coin they spend and waste on endless lost wagers is the blood of our comrades. No more of this. No more.
Every memorial day we all come on here and pay bullshit lip service to the obligatory memorial day thread.
And every year on one of those threads I post 3 names
BRADLEY KRITZER
JAMES MARSHALL
ADOLFO CARBALLO
3 young men, Brad turned 18 fucking 3 weeks into his deployment, who died in Iraq...
Any quality 9mm bounded JHP will be sufficient fir self defense. The less powerful. 38 Special has long proven itself sufficient for self defense.
9mm is cheaper, easier to find and provides better follow up shot control than the other 2 main pistol cartridges.
Still when limited to 10 rounds I...
What did @DoD1776 end up with anyways?
I recently saw this thing though-
https://www.eotechinc.com/eotech-vudu-3-9x32-sfp
It's a lightweight, compact supposedly rugged 3x9 scope with wife FOV and integrated mount (same footprint as the small ACOG lug) for EoTech's pistol dot optic...
Pre realization that SIG is a POS company I would have considered purchasing one of these. Now however, well SIG is in the same category as Springfield Armory and Rock River arms: on the never ever buy list.
The weirdest and perhaps fanciest of my knives, the ZT 460.
I thought this one was gonna break my heart, the carbon fiber side was covered in scratches and the action felt like it was full of sand to the point it would not flip open freely.
The scratches turned out to be just marks that wiped...
Yeah, prices are nuts now. I did a quick price check on various mount I consider GTG-
LaRue is charging $400 for their mounts now and while the are good mounts that is way overpriced.
ADM is running $220-$270 for their mounts which is more reasonable
Midwest Industries run right around $200...
Ah yes, the inevitable consequence to getting a new knife. Got blood all over the scale too. But a little water, a drop of hand soap and a toothbrush cleaned it right up. Re-oiled and good as new.
The blade had that no pain cut sharpness BTW