Yeah I plan on getting hammered tonight too.
Starting a "What did you Get today" thread. Let's give it a try (dont forget pics)
- Thread starter Edwardteach72
- Start date
Saltwater60
20×102mm Vulcan
Any time. I have a turret of sorts on my roof. You can see for about a mile straight from my third floor since I’m on a hill so bring something with some long reach.
Got a new trigger and new upper coming for my AR... Wanted to have a 300blk set up for a while. Original set is 5.56...
Need some mags (to keep things separate) and then need to get a can (silencer)!
Shits n Giggles coming soon! Supposedly "Hollywood" quiet when set up properly
Need some mags (to keep things separate) and then need to get a can (silencer)!
Shits n Giggles coming soon! Supposedly "Hollywood" quiet when set up properly
Breecher up!
Vapor
.308 Win
That_FNG
.308 Win
Decided to replace a leaky broken basement faucet today. Went to Lowe’s and found out they don’t sell just the faucet, you have to buy the whole utility sink. Went to Home Depot and bought just the faucet I needed. Currently replacing the faucet with great success!
Carlos Hathcock
.450/400 Nitro Ex
Saltwater60
20×102mm Vulcan
I largely hate Lowe’s. I hate what they have, their people are rude, and they treat their workers like crap. Homedepot is almost 100% my first and only stop. I have spent well over a $100,000 at homedepot in my lifetime and I’m only half dead.
^^^^^^ . This right here . I concur. I have a finished basement and a master bathroom on the first floor. Took a shower last night when I returned home from grand island . Walked down stairs for something and noticed a very minor wet spot above my pellet stove directly under the shower pan in the bathroom. Today I cut the drywall out on the ceiling to investigate. The flange has a very minor leak. Not even going to start taking it apart because I know what’s going to happen if that shower is not operable by Sunday night before I leave for grand island again. My wife will shoot me. Problem is identified. Access has been made. And a towel will be placed on the floor until I have ample enough time to make a 15 minute project into 8 hours.
That_FNG
.308 Win
Didn’t have much choice. The handle on the faucet broke off and the faucet was already leaking and was changing from a leak into a constant stream. With how the plumbing is there is no current way to shut off water to the utility sink faucet without shutting off water to the whole house.
I had planned on doing electrical and replacing all the outlets and light switches in most of the rooms in the house. That got curveballed by this.
These came in for my Girsan 2311 Witness Brat.
Still waiting on the Red Dirt trigger, Nighthawk drop-in trigger system, and Cosaint Arms grip.
Got worried that Wilson Combat sent the wrong ejector but that apparently works for 9mm.
Still waiting on the Red Dirt trigger, Nighthawk drop-in trigger system, and Cosaint Arms grip.
Got worried that Wilson Combat sent the wrong ejector but that apparently works for 9mm.
That_FNG
.308 Win
Out of curiosity does it take the same mags as the prodigy or staccato?
Yes. They are Checkmate mags. I'm not sure if EAA repackaged them or if Checkmate packages the mags for them.
According to Checkmates website: 10 and 17 rounder description the same.
Check-Mate 2011 17 Round 9mm 126mm Long magazine. These fit the Staccato 2011, Springfield Prodigy 1911 DS, LFA Apollo 11 Full Size, EAA Girsan Witness 2311, Jacob Grey TWC 9, Tisas Double Stack, Kimber 2K11, and more. Check-Mate Magazine CM9-2011-126-S.
Last edited:
That_FNG
.308 Win
Good to know. I’m interested to see how reliable the brat is. I have a bunch of duramag 10 rounders that have been reliable so far in my prodigy that I got for $34 a piece new. Being able to share mags between guns is a bonus.
Depick
.308 Win
Thats a lesson I learned the hard way.
It’s pretty expensive to get a plumber at your house at 3pm on Sunday.
That_FNG
.308 Win
Shits delicious
That_FNG
.308 Win
Picked up a new to us all steel patio furniture set for $150 today
Only reliability issues i heard of is the ejector. That's why I'm replacing it before it even shoot it once I get to take it home from the shop.
Jmac00
.475 A&M Magnum
I took Einstein out to lake Michigan to go for a swim, he literally would not stop retrieving. When I made him slow down an take a break, he sat there and whined until I threw his foam duck.
Then we decided to go home, but we went home from distillery to distillery on the way back, then when we got back to camp one of the other campers decided it was a good idea to go out for dinner, so now Im trashed and full, and Einstein is exhausted. good news, I didn't drive, LOL
Then we decided to go home, but we went home from distillery to distillery on the way back, then when we got back to camp one of the other campers decided it was a good idea to go out for dinner, so now Im trashed and full, and Einstein is exhausted. good news, I didn't drive, LOL
More parts came in for my Girsan 2311 build. Just waiting on NYPD to give me my fucking permission slip now.
Saltwater60
20×102mm Vulcan
Barqs is the best rootbeer and I love floats. Where did you get these?
That_FNG
.308 Win
Aldis had them. Headed back to buy more.
Carlos Hathcock
.450/400 Nitro Ex
Bustedknees
12-gauge slug (smooth bore)
I had to Google where the term actually came from.
Carlos Hathcock
.450/400 Nitro Ex
Saltwater60
20×102mm Vulcan
Now this I like.
That_FNG
.308 Win
EGW extended slide release
EGW 1 piece guide rod assembly
EGW magwell
Atlas Gunworks short trigger
Wilson combat safety plunger spring
still need to do extended mag release, spring kit, optic and light.
HOLY SHIT!!!!! I finally have something to add to this thread....