The gun shoots well enough. It's just rather crude mannered. The action is gritty and clunky. I want to polish what I need to in order to make it cycle smoothly and without hangups.
Friend of mine just picked up a Guide Gun (he's on his way to Alaska to work as a Packer for a Guide up there) they are a stout and well designed Rifle, while mine is just the way it came from Marlin, the idea of "upgrading" things like the magazine follower from plastic to metal, maybe the Lever (they are expensive) I can't change the sights on mine because they're Dove Tail, although yours are likely different, Timmney Offers a Trigger setup, heavier springs, etc. Good stones and abrasive erasers to de-burr sharp edges, do be aware of the loading gate screw and that it's under tension at an angle; have to press the spring arm in flat, hold it in place, then screw it down. (new screw might be a good idea) if it backs out it will jam the action from operating.
) and the gun shot just fine. The target was about 65 to 70 yards away, and the big gun cut the ½" re-bar target stand in half. Spat welded it back together and we kept shooting. 
Remlins were hit or miss, at least the first guns were...warranty work and re-work are not the friends of manufacturing, but at the same time Managers were ordering QC guys to send it anyway. I bought an 1895CC (Cowboy Carbine) that was a WIP gun for well under $500 and sold it a few years later, now I have one of the last Rifles produced in Conn. and I zero plans to let it go...45/70 is a fun and versatile cartridge, but expensive if you don't roll your own...If you want "Big Medicine" out of it, buy Buffalo Bore cartridges and a mouth guard.
Classic Dennis. Speaks the truth with no filter.I have a Remlin 1895GG, I was having a hell of a time getting the damn thing to cycle without jamming. So I took it to Van Tassel Gunsmithing on Rt 37 in the North country. I told him what it was doing, He called three days later and said "are you trying to catch the brass after you shoot?" I said yes, sometimes. he said "well stop doing that, put your big boy pants on and cycle this gun like you mean it, like it's a machine, slam the lever, and you'll be fine"
Turns out he's right, last year I was at spat's house ( i'll be there next Thursday the 19th
I have Ranger Point Precision* parts on this thing. I have a flyweight feed gate. I have a Midwestern M-lok handguard, and Alaskan Peep sites
I LOVE MY LEVER GUNS. I also have a Marlin 'JM' stamped 336 in 30-30 with a 4x12 Variable scope, that my first MIL bought me in 1982. I LOVE THAT GUN. Its killed a few deer.
