We're talking about two different things.
A 3D printer is of no use finishing off an 80% Lower.
I am too old school to trust a printed plastic gun right now.
DOJ settles Landmark Gun Suit, Safeguarding The Second Amendment
- Thread starter Arjuna
- Start date
We're talking about two different things.
A 3D printer is of no use finishing off an 80% Lower.
I am too old school to trust a printed plastic gun right now.
Dinkus the Stinkus
.44 mag
That wouldn't work at ecc lol. They know what an AR lower looks like. Other components maybe if you can genuinely show how it works.
Twogunwilly
6.5 Creedmoor
kev74
20×102mm Vulcan
Plastics, my boy. Its the wave of the future!We're talking about two different things.
A 3D printer is of no use finishing off an 80% Lower.
I am too old school to trust a printed plastic gun right now.
Dinkus the Stinkus
.44 mag
The boys from inRange ran over a gwacs cav15 lower with a truck and it survived. It's a polymer lower, however unlike the one in the image above it has the stock molded on it as well which adds to the rigidity.
swilliams
6.5 Creedmoor
I don't disagree, but at the same time, with the number of formerly red states that are now very purple (and that Trump barely won), we need some more pro-2A people moving out of places like NY, NJ and MD. Come live - and vote - in places where we really need it.
I don't disagree, but at the same time, with the number of formerly red states that are now very purple (and that Trump barely won), we need some more pro-2A people moving INTO places like NY, NJ and MD. Come live - and vote - in places where we really need it.
FIFY
spat
.950 JDJ
It doesn't take much to make an 80%.
The jigs do most of the work. You could manage with a dremel and a hand drill if necessary. Many of them are designed to work with just a trim router freehand.
Shadow2
6.5 Creedmoor
i was hoping they would ban all new guns and grandfather what existed ... i made sure to buy shit for my unborn grand kids already ...
spat
.950 JDJ
Actully she is right. gerrymandering works by making the districts you lose in lose by huge margins, so that you can concentrate your voters in the marginal districts to win them.
You can't redraw the states to gerrymander them, but if people vote with their feet, you can make it so that the dems win a couple states by 40% margins, so that we can win the rest. That is assuming that each person has already decided who they will vote for.
holdover
.475 A&M Magnum
Ok, I Don't mean to pee on your barbecue, couldn't ""are not inherently military,"" be construed to be Non militia, ergo, no protection under the law? If they are non military weapons , they are not militia weapons and are they no longer protected under 2A?
Just throwing it out there,
Just throwing it out there,
spat
.950 JDJ
If they go that route and try the "only military arms" are protected, then they have to say good by to the NFA. "Sorry, only things issued to the military, so full auto MP5's, M4's, etc...".
If they make that call, I'm ordering a ma deuce tomorrow.
At this point I believe the best solution is to take Gun Control AWAY from the States, and back 100% to the Feds.
That is what the 2A requires.
Think about it. Look at the 1A.
Can a Local Government forbid any talk concerning guns ? As much as they would like to ?
Though I do recall Obama was making a very strong attempt to make Forums such as this one illegal, on a National basis.
That is what the 2A requires.
Think about it. Look at the 1A.
Can a Local Government forbid any talk concerning guns ? As much as they would like to ?
Though I do recall Obama was making a very strong attempt to make Forums such as this one illegal, on a National basis.
kev74
20×102mm Vulcan
Even better... Take away all gun bans (gun control) and instead, remove people from society who demonstrate that they can't get along peacefully - no plea bargains, no parole, no reduced sentences.
Acer-m14
20×102mm Vulcan
a drill press like that can't handle the side to side load , there built for up and down .. you will get a lot of chatter unless you covert it over to how a mill is setup .. seen some you tube vids about it ..
Mini Milling Machine | Grizzly Industrial
just a random pick from there site .. may or not be the cheapest ..
seen vids on you tube of guys adding digital readouts to them ..
I think they have some small lathes too
@FrankenCub
kev74
20×102mm Vulcan
I have that one. I'd be pushing its limits doing an 80% lower on it. Bigger is better, and there's a lot more value in used machines.
BDinPutnam
.475 A&M Magnum
This would be somewhat the opposite of Heller, McDonald, and I believe the early case (30's? In re sawed off shotguns) was Marshall.
The key is (hopefully) "in common use."
Despite my decades of experience as a Mechanical Engineer, I would be the first to admit my hours spent in milling first-hand would be in the low double digits.
I would expect a Cross Vise, operated with a sharp bit, in Aluminum, combined with a Drill Press, would do adequate work for an Amateur.
But I cannot confirm this with experience.
kev74
20×102mm Vulcan
As someone who has worked in the engineering, manufacturing and materials testing fields, and who has a low-budget machine shop in their basement, I think you'll be sorely disappointed trying to mill an 80% lower with a drillpress and a cross slide vise.
kev74
20×102mm Vulcan
Precisely moving the work on the drill press to accurately locate holes.
It might work as a mill, but there are better, cheaper alternatives - like the trim router jig set as mentioned above.
FrankenCub
.338 Win Mag
I think the only way it's even a viable option is if you drill out 90%+ of the material and use and end mill bit to clean up what little is left. Which I have been thinking of going that route.
I can't afford even the cheapest of decent mills right now.
kev74
20×102mm Vulcan
There are deals out there if you do your homework.
Bridge Port Series 1 Vertical Milling Machine. Vertical Milling Machine. 9" x 48" bed. 2hp 3ph,
spat
.950 JDJ
Get one of the router jigs.
Then all you need is a $40 harbor freight trim router, the bits and a vice to hold the lower.
FrankenCub
.338 Win Mag
Well, only if others don't want it as bad as I did. Otherwise the auction price goes high. I watch the gov auctions a lot for military trucks, same happens. Can usually get good buys on parts vehicles until enough people have interest in them. Then even trashed and looted LMTVs go for crazy money.
I may watch some of those auctions after I get moved and have a small shop set up. But right now, even $500 is too much for me.
kev74
20×102mm Vulcan
A lot of the older manual metal working equipment goes for CHEAP! I passed up on surface grinders lately for $50 and $100 recently only because I don't have space for it now.
FrankenCub
.338 Win Mag
Hmmm, maybe it would be worth looking into once I get set up. I learned on the old manual types anyway. No need for digital for the work I've done lol.
FrankenCub
.338 Win Mag
I've looked at several of them over and over, but I figure for what I would get out of them for the cost of a good jig and router could be better spent elsewhere. I would have to finish a lot of lowers to make it worth it to me.
Arjuna
.338 Win Mag
It;s Huuuge