For those of you with an LCP II.

Marine Cpl · Dec 27, 2019

I shoot exclusively Fiochhi FMJ and have no issues. None. None at all. Previously, American Eagle gave me problems.

spat · Dec 27, 2019

I haven't had any trouble with mine. I have fed it a variety of cheap FMJ and occasionally hornady critical defense.

Marine Cpl · Dec 27, 2019

seezur said:
What weight Fiocchi? I’m not sure why it’d matter but they do make a 95gr and mine has been exclusively 90.

95 gr FMJ

Marine Cpl · Dec 27, 2019

Every town is different. My town gives a higher percent if you are a combat vet and can show a campaign medal or Armed Forces Expeditionary medal. Like Goperfect said,” Just stop by Town Hall and ask.”

Criticalt · Dec 27, 2019

Ruger is pretty good with their customer support. I would explain your issues to them and have them either fix it right or replace it.
Rugers are generally pretty great guns and usually arent ammo sensitive.
We have 5 Rugers and have had zero issues for years.

eochief66 · Dec 27, 2019

I had one, actually two.
The first one I shot 300 to 400 rounds of the cheap stuff through it with good results. One day I decided I had better try the Federal HXP through it because that is what I was carrying in it. Got off one shot and the mag fell out! Tried it multiple times with 4 different mags with the same results.
Called Ruger, sent it to them. They fired 95 rounds of Lawman through it without a problem.
When I got it back I shot it with Federal HXP HP's, Remington premium ammo and Sig premium HP's. The mag fell out after the first shot each time.
Sent it back to Ruger and told them to try premium ammo not the cheap stuff.
A week later I received an email saying the tech said they were going to retain it and send it to a engineer.
They sent me a new one. Fired it with the same results, mag falling out! My local dealer thought I was doing it some how. I let him shoot it, he had the same results with the mag falling out. I sent it back and asked for a refund. Bought a S&W 442!

Saltwater60 · Dec 27, 2019

Criticalt said:
Ruger is pretty good with their customer support. I would explain your issues to them and have them either fix it right or replace it.
Rugers are generally pretty great guns and usually arent ammo sensitive.
We have 5 Rugers and have had zero issues for years.

I agree. Send it back and they will make it right. Sucks but they are good. They basically gave me a new SR22 when mine was bad.

Tisto · Dec 27, 2019

I don't have an LCP, but I can tell you that it is very possible that the gun was designed to use specific ammunition. I have a SEECAMP .32 auto, and they are designed to use Winchester Silvertips, AND NOTHING ELSE. The owners manual explicitly states this, and even states that use of any other ammo may void the warranty ! I don't know about the Ruger, but it would not surprise me to learn of a similar situation.

beebee · Dec 31, 2019

Most owners of the LCP II have zero problems.. They have been very reliable.. Like anything else, there are some bad ones that make it through.. Ruger CS is second to none...

BlackDragon · Dec 31, 2019

Send it back, Ruger will keep at it until you are satisfied.

I had an issue with my sr22 which was caused by me, but they warrantied it without question.

Bananabandit · Jan 1, 2020

seezur said:
Yeah sending it back is the cheap, smart answer. Part of me just wants a kahr, and also my confidence has been severely shaken in the LCP II. It’s a great gun in terms of form factor and I have a bunch of mags and a few holsters for it. I guess I’m just wondering what they can really do for it, since when I sent it they seemed to replace pretty much everything outside of the frame.

I have at least 5 rugers and this is the only gun ruger or otherwise, that’s ever been unreliable, and unreliable to the point of essentially being non functional.

Love my Kahr CM9. Thing is TINY.

Marine Cpl · Jan 1, 2020

seezur said:
Yeah sending it back is the cheap, smart answer. Part of me just wants a kahr, and also my confidence has been severely shaken in the LCP II. It’s a great gun in terms of form factor and I have a bunch of mags and a few holsters for it. I guess I’m just wondering what they can really do for it, since when I sent it they seemed to replace pretty much everything outside of the frame.

I have at least 5 rugers and this is the only gun ruger or otherwise, that’s ever been unreliable, and unreliable to the point of essentially being non functional.

Listen. I’m not one that will sugar coat and lie to protect an investment. I hate when people do that. They do it all the time with the new Sigs. If the LCP 2 would have given me problems, I would be the first to say it.

In the very beginning I had a few failures to extract properly with American Eagle. Since changing to Winchester white box and Fiocchi, all the problems are gone. It’s a good gun.

I would try to use fiocchi if I were you and if it still persists, send it back for a new one. I bet my life on it and since the ergonomics are so good, I often carry it more than my Glock 26 since it’s like not carrying a gun at all.

71velle · Jan 1, 2020

Contact Ruger.

eochief66 · Jan 1, 2020

Something else my dealer and I found out about my gun!
Both the guns I had were made in North Carolina. After my dealer shot my second gun and had the same problem, (mag falling out) we tried my mags in two other LCP 2's he had in stock. The mags fit the same as in my gun , sloppy for and aft. All were made in NC. The other LCP2 he had was made in Arizona the mags fit much better, no slop for and aft.
He said Ruger North Carolina has a problem!

Saltwater60 · Jan 1, 2020

eochief66 said:
Something else my dealer and I found out about my gun!
Both the guns I had were made in North Carolina. After my dealer shot my second gun and had the same problem, (mag falling out) we tried my mags in two other LCP 2's he had in stock. The mags fit the same as in my gun , sloppy for and aft. All were made in NC. The other LCP2 he had was made in Arizona the mags fit much better, no slop for and aft.
He said Ruger North Carolina has a problem!

They make different guns in different states. Not sure the list. I contacted CS for my SR22 and it says for this gun press this for this factory.
I also have the LCPII and it’s made in AZ I think but my mags were made in 2 different factories.
if you decide to part ways with it I could use a few mags and would buy some off you along with a descent pocket holster. Selling all together you normally lose your ass. Not trying to sway you one way or the other but just a thought.
Ruger will make it right. I have the frame off my sr22 and that’s it. Everything else is brand new and paid no shipping there or back.

Marine Cpl · Jan 1, 2020

eochief66 said:
Something else my dealer and I found out about my gun!
Both the guns I had were made in North Carolina. After my dealer shot my second gun and had the same problem, (mag falling out) we tried my mags in two other LCP 2's he had in stock. The mags fit the same as in my gun , sloppy for and aft. All were made in NC. The other LCP2 he had was made in Arizona the mags fit much better, no slop for and aft.
He said Ruger North Carolina has a problem!

That may be it. My mags are made in Italy.

Darth · Jan 2, 2020

I haven't had this issue as I haven't shot my LCP 2 yet (just got it this Sunday), but I did think about @Marine Cpl when I was picking it up. Got it dirt cheap on buds. $189 for the blue camo LCP 2.

Will go into the pocket rotation with the P238.

Now I have 3. 380s.

Marine Cpl · Jan 2, 2020

Darth said:
I haven't had this issue as I haven't shot my LCP 2 yet (just got it this Sunday), but I did think about @Marine Cpl when I was picking it up. Got it dirt cheap on buds. $189 for the blue camo LCP 2.

Will go into the pocket rotation with the P238.

Now I have 3. 380s.

View attachment 60361

View attachment 60363

I’m really considering just making it an everyday carry.

beebee · Jan 27, 2020

Darth said:
I haven't had this issue as I haven't shot my LCP 2 yet (just got it this Sunday), but I did think about @Marine Cpl when I was picking it up. Got it dirt cheap on buds. $189 for the blue camo LCP 2.

Will go into the pocket rotation with the P238.

Now I have 3. 380s.

View attachment 60361

View attachment 60363

I dunno, I have my doubts as to if you'll carry it as much as your P238, after shooting both at the range,, The Sig is a lot more accurate, and a lot easier to shoot for any length of time.. I owned The LCP Custom as well as the LCPII,, Both nice little guns, until I shot my wife's P238.. That was the end of the little Rugers for me... They are somewhat small than the Sig, to me thats the one and only advantage, other than the lower price... bob

Saltwater60 · Jan 29, 2020

beebee said:
I dunno, I have my doubts as to if you'll carry it as much as your P238, after shooting both at the range,, The Sig is a lot more accurate, and a lot easier to shoot for any length of time.. I owned The LCP Custom as well as the LCPII,, Both nice little guns, until I shot my wife's P238.. That was the end of the little Rugers for me... They are somewhat small than the Sig, to me thats the one and only advantage, other than the lower price... bob

I shoot my LCPII more accurate than my larger carry gun. I find the LCPII very easy to shoot accurately. Now shooting it for anything over 50 rounds at a time is a different story. The grip is a little small for drawing too.

I do very much like the feel of the p238, but I got my LCPII for $240. You won’t find a P238 for that price. I do feel the P238 is a quality gun and probably better quality than the LCPII so I’m not knocking the P238. I came very close to buying one.

spat · Jan 29, 2020

Saltwater60 said:
I shoot my LCPII more accurate than my larger carry gun. I find the LCPII very easy to shoot accurately. Now shooting it for anything over 50 rounds at a time is a different story. The grip is a little small for drawing too.

I have the opposite experience.

I can shoot it all day, but it is noticeably less accurate than my G26.

It is however more than accurate enough for it's intended purpose. I can put the whole mag reliably into the center of a torso target at 15 yards in a fairly rapid fashion.

Two unfortunate things I have noticed lately after carrying it in the factory pocket holster however.

1. The finish is not as durable as some others. I admittedly don't clean and lubricate it as often as I should, but I noticed it starting to develop some surface rust on the side that faces my leg in the pocket.

2. On more than one occasion I have found a magazine that was firmly seated to be unseated when removing the gun after carrying it for a day.

I can only surmise that the magazine release was pressed enough at some point in my travels.

This happens in the factory pocket holster with nothing else in the pocket. I assume the release is just pressing against my leg enough to let go.

Jem45472 · Jan 29, 2020

Marine Cpl said:
That may be it. My mags are made in Italy.

Lc9s users had similar problems, and the solution was to buy the Italian magazines. Problems fixed.

Jem45472 · Jan 29, 2020

Quick Google search.

ruger Italian magazine - Google Search

For those of you with an LCP II.

.40 S&W

.577 Tyrannosaur.

.950 JDJ

.40 S&W

.40 S&W

.577 Tyrannosaur.

.577 Tyrannosaur.

.338 Win Mag

9mm

20×102mm Vulcan

.308 Win

.45 acp

.40 S&W

.40 S&W

.338 Win Mag

.577 Tyrannosaur.

.223 Rem

9mm

20×102mm Vulcan

.577 Tyrannosaur.

Bunny In Chief

.577 Tyrannosaur.

.45 acp

20×102mm Vulcan

.950 JDJ

.308 Win

.308 Win