80% lowers in ny
- Thread starter Genwyoaa
- Start date
4WHLDRFTN
.308 Win
Good luck
fnfalguy
.308 Win
Nighttrain
.357 mag
fnfalguy
.308 Win
Problem is that over the last few years almost all companies have stopped shipping 80 lowers to NY folks. You may have better luck on the ar15 forum in the hometown section. Best of luck.
Carlos Hathcock
.450/400 Nitro Ex
Prob not far from the truth.
Thank you
PutnamCharlie
6.5 Creedmoor
At this point in time you will have to put a serial #on it if you do find a way to get one and keep it in NY. Your better off just buying a stripped one for a build. Aero has blem's on sale for 85 bucks right now. Better choice in my opinion. I have several 80's and don't plan on milling them until I am out of this state.
Robin
.577 Tyrannosaur.
Sad fucking times!
Robin
Robin
Robin
.577 Tyrannosaur.
I must have missed something. Serial numbers?
Robin
Robin
Yes, yes it is. We do have this place to bitch about it though. Hell, even those members that don't especially like other members at least all have this problem in common.
PutnamCharlie
6.5 Creedmoor
'Ghost Gun' Bans: NY Law Signed, Complaint Filed Against New DE Law
Three new "ghost gun" laws were signed last week in New York, and gun-rights advocates are battling new and similar legislation in Delaware.
freerangeamerican.us
gun_slinger_boy
.338 Win Mag
If possible have family or friends out of state get if for you and then have them send it to you. You could also get a PO box out of state and have it sent there.
meketrefe
.450/400 Nitro Ex
someone mentioned home depot had 0% lowers in stock.
FRANKIE
.308 Win
Only if they promise to roll stamp the number on
LOL!
LOL!
Acer-m14
20×102mm Vulcan
NY law makes you break FED law since you have to take your 80 to someone else to help make it .. ( put the serial # on it ) ..
Acer-m14
20×102mm Vulcan
here is a photo of a 80% musket .. LOL ..
FRANKIE
.308 Win
Ok
It’s engraved now
It’s engraved now
Incorrect: Adding a serial number is not part of the machining necessary to make it function as a firearm.
atc250r
.45 acp
New Yorkistan is planning on banning blocks of aluminum next.
If it is still an 80% anyone with the tools can do it. If it is complete you will want an engraver with an FFL to do it or do it yourself.Just asking for a friend. Where can you get an 80% lower serialized?
Uzi
.308 Win
Hey, fellow gun enthusiasts. Don't mind me.
How does this do it yourself work?
Tintalieau
.40 S&W
Firearms Verification Overview Marking Requirements
By engraving, casting, stamping (impressing), or otherwise conspicuously placing or causing to be engraved, cast, stamped (impressed), or placed on the frame, receiver, or barrel thereof certain additional information. This information must be placed in a manner not susceptible of being readily obliterated, altered or removed. For firearms manufactured, imported, or made on and after January 30, 2002, the engraving, casting, or stamping (impressing) of this information must be to a minimum depth of .003 inch. The additional information includes:
1. The model, if such designation has been made;
2.The caliber or gauge;
3.Your name (or recognized abbreviation) and also, when applicable, the same of the foreign manufacturer or maker;
4.In the case of a domestically made firearm, the city and State (or recognized abbreviation thereof) where you as the manufacturer maintain your place of business, or where you, as the maker, made the firearm; and
example:
s/n: LGB01 or FJB01 -- (or F whoerever ....you get the idea, just don't put the same # on multiple builds)
model: FTNWO15 -- (not required for homemade)
Caliber: .223 -- (sorry tactial nukes fall under destructive devices and have different marking requirements
)Tintalieau -- (I put whats listed on my state drivers license)
My city, NY
.003" is a little more than the thickness of a sheet of paper, some good stamps and a strait edge are all you really need (i use 2, 3/8" pieces of 90 degree aluminum and squeeze stamps between and set up each line and then start whacking)
Last edited:
When I was making guns in NY. I would either use my ghost gunner and an engraving program, stamp set or an engraving pen to mark the guns I made. All my homemade handguns were put on my license with me as the manufacturer and a serial number of my choosing with the caliber. My rifles just had name, town, serial number and model on them Example: Dsdmmat, anytown, NY, serial number: yougetthedrill01, model: whatever I decided to call it
Since the untraceable receiver act has passed making possession of an unserialized receiver illegal, if you are in possession of a rifle you made without one it has to be marked. The law requires gunsmiths to serialize guns they make but does not have any guidance for those who are in possession of guns they already made. So you have three choices, find an engraver with an FFL to engrave your homemade firearm, engrave it yourself or destroy it If you want to remain legal. If you don’t care then you don’t have to do anything.
Robin
.577 Tyrannosaur.
Well, if I engrave a serial number on it and by all other measures it is legal ( think SAFE ACT), and not a pistol, why should I register it.
Robin
Robin
Last edited:
gun_slinger_boy
.338 Win Mag
You can literally use a rusty screw driver and gouge it in as long as it meets the tyrants requirements.