ATF Raid 3-D Printed Firearms Maker on Machinegun Charges

kev74

kev74

20×102mm Vulcan
Messages
49,997
Reaction score
158,181
Location
Orange Co.
A couple of quick takeaways...
- Your casual acquaintances will flip on you when cops/troopers/AFT comes knocking.
- dive teams negate boating accidents
- funny memes will be used against you in a court of law.

www.ammoland.com

ATF Raid 3-D Printed Firearms Maker on Machinegun Charges

A significant player in the 3D-printed firearms world has been arrested on charges of violating the National Firearms Act of 1934 (NFA).
www.ammoland.com www.ammoland.com
 
Phazer

Phazer

.450/400 Nitro Ex
Messages
9,848
Reaction score
21,023
Location
Province of Westchester
kev74 said:
www.ammoland.com

ATF Raid 3-D Printed Firearms Maker on Machinegun Charges

A significant player in the 3D-printed firearms world has been arrested on charges of violating the National Firearms Act of 1934 (NFA).
www.ammoland.com www.ammoland.com
Click to expand...
"a jig used to finish 80% AR15 receivers, and various other tools that could be used for gunsmithing."

Ummm...so? Not illegal.

Screwdrivers, hammers, vises, sandpaper, and files can all be used for "gunsmithing"...or for building a cabinet.

Hello, State Police...my neighbor that I don't like has a drill press in his garage. You may want to investigate.

​

 
Z

Zerex

.308 Win
Messages
3,054
Reaction score
2,416
Location
Rome, NY
The 3rd holed drilled, in 39, AR Ghost Gun receivers, for the auto sear, is a big no no.

He also possessed a drill jig and other tools.....most charges except the MG will likely be dismissed.

Impatience got him..... be patient..............you got guns now..........maybe neutered, but still legal.

I have fired MG's in Pa at the Keystone Shooting Range, near Cranberry...........Thompsons, AR's, etc...expensive but they are really not needed....semi is enough.

BEE PATIENT.
He will have to be for the next decade.
 
VietnamEraVet

VietnamEraVet

.308 Win
U.S. Military
Messages
4,257
Reaction score
8,980
Location
Ex WNY as of 08/2018. Screw FUAC & FUKH too!
kev74 said:
A couple of quick takeaways...
- Your casual acquaintances will flip on you when cops/troopers/AFT comes knocking.
- dive teams negate boating accidents
- funny memes will be used against you in a court of law.

www.ammoland.com

ATF Raid 3-D Printed Firearms Maker on Machinegun Charges

A significant player in the 3D-printed firearms world has been arrested on charges of violating the National Firearms Act of 1934 (NFA).
www.ammoland.com www.ammoland.com
Click to expand...
Reminds me of two things:

1. Loose lips sink ships, so to say.
2. With the absolute proliferation of all type of tracking devices, - (hypothetically speaking now, - NOT offering any kind of advice to break ANY law...), - if you can't afford people finding out where you store stuff, - use a vehicle that cannot be tracked, and for God's sake, - leave your cellphone and other devices at home. And check your things, including clothes for hidden trackers!

That shit from the Matrix is getting closer to reality by the day!

 
Z

Zerex

.308 Win
Messages
3,054
Reaction score
2,416
Location
Rome, NY
I depend upon them to track me......................and read all my posts.................No secrets anymore.

EZ pass does.
 
Cavalry

Cavalry

.338 Win Mag
Messages
5,092
Reaction score
8,914
Location
Behind Enemy Lines
VietnamEraVet said:
- if you can't afford people finding out where you store stuff, - use a vehicle that cannot be tracked, and for God's sake, - leave your cellphone and other devices at home. And check your things, including clothes for hidden trackers!
Click to expand...
They planted a GPS on his vehicle, there is very little someone can do to prevent that other than never leaving it unattended outside. He probably wasnt even aware he was on their radar.

This whole thing stinks. His crimes seem to be living in NY and being dumb enough to store NFA items where it could be found.
 
VietnamEraVet

VietnamEraVet

.308 Win
U.S. Military
Messages
4,257
Reaction score
8,980
Location
Ex WNY as of 08/2018. Screw FUAC & FUKH too!
Cavalry said:
They planted a GPS on his vehicle, there is very little someone can do to prevent that other than never leaving it unattended outside. He probably wasnt even aware he was on their radar.

This whole thing stinks. His crimes seem to be living in NY and being dumb enough to store NFA items where it could be found.
Click to expand...
Don’t kid yourself, they can get inside your garage and plant a tracker without difficulty. Or, when you park it out at some store,- even just during a short errand run.
 
Cavalry

Cavalry

.338 Win Mag
Messages
5,092
Reaction score
8,914
Location
Behind Enemy Lines
Something to think about. This dude was an admin on the gatalog rocketchat. If they seized his devices which I am sure they did, they have quite the honeypot of information that they "legally" couldn't use before.
 
FRANKIE

FRANKIE

.308 Win
Messages
3,465
Reaction score
4,422
Location
Lenapehoking region of NY.
Zerex said:
The 3rd holed drilled, in 39, AR Ghost Gun receivers, for the auto sear, is a big no no.

He also possessed a drill jig and other tools.....most charges except the MG will likely be dismissed.

Impatience got him..... be patient..............you got guns now..........maybe neutered, but still legal.

I have fired MG's in Pa at the Keystone Shooting Range, near Cranberry...........Thompsons, AR's, etc...expensive but they are really not needed....semi is enough.

BEE PATIENT.
He will have to be for the next decade.
Click to expand...
59 3 way receivers
 
Cooolone

Cooolone

.338 Win Mag
Messages
6,288
Reaction score
9,737
Location
NY, USA
Well, there is plenty you 'could' do about it ...

There's GPS jammers for one! And many more! There's electronic sweeps can be done as well.

Loose lips definitely sink ships, and again, of you're ever worried that the Big Bad Wolf might come some day, there are ways to insulate yourself, just be smart! That's all... Be smart as most criminals aren't! And if you aren't a criminal it should be because you're being smart!

Or hey, some States, lol, you don't have this problem and can live freely! Anyways... I'll just leave that one there ;)
 
Acer-m14

Acer-m14

20×102mm Vulcan
Messages
35,917
Reaction score
38,484
Location
Livingston
what if the 3rd hole is off by 1/8 of a inch or even a 1/2 inch ... look my lower has a extra hole ..

:ROFL: :ROFL: :ROFL: :ROFL: :ROFL: :ROFL: :ROFL: :ROFL:

you would be better off just jamming some aluminum down in there and cause a malfunction like the ATF did with the auto card

:ROFL::ROFL::ROFL::ROFL::ROFL::ROFL::ROFL::ROFL:
 
Z

Zerex

.308 Win
Messages
3,054
Reaction score
2,416
Location
Rome, NY
Hahaha.
Back in the 1980's, my office ran afoul of the NYS Inspector General............. I would go to the big parking lot under rt 690 to go to field work,........I could easily see the stakeout personnel...........ez to see...anomalies.
I told the other guys................PARANOIA!! THEY SAID.

5 guys were caught..one now dead, would like clockwork go to his job at K mart or the Fayetteville VFD......another dead one, would go to his rental properties, another also passed, to his telecommunications job, another to play golf, another to drink at the Elks Club.

NO ONE WAS FIRED OF COURSE.
I was followed for months..........they even had an aircraft a Red Cessna that everyone saw regularly flying low..........NYSP airplane.

I was always a good boy....

I was taught some spycraft, like how to id and break a tail, by a now dead shirttail relative, American Spy...he had a closet full of Military Officers uniforms for all the services and was gone for 1-2 years at a time........very dangerous guy. He was involved in Iran-Contra...knew Reagan.

Anyway it stuck, always plan on you being watched on line or in your travels.

THIS IS THE IRON CURTAIN........ENTERTAIN THEM.
 
M

ManualF150

.308 Win
Messages
4,836
Reaction score
8,830
Location
Cayuga
Thinking a little bit outside of the box with any company or individual that owns a 3D printer, lathe, CNC machine, a Dremel, etc., access to a hardware store with some imagination and not much talent can create a firearm all the way up to a self-repeating gun (fully automatic/machine gun).

Someone needs to challenge automatic/machine guns under the currently laws.

I for one don't have a need for a machine gun or a fully automatic gun, but they should be publicly accessible to those that entertained to want one freely.

Also I see it infringing on people's other constitutional rights.
 
Acer-m14

Acer-m14

20×102mm Vulcan
Messages
35,917
Reaction score
38,484
Location
Livingston
ManualF150 said:
Thinking a little bit outside of the box with any company or individual that owns a 3D printer, lathe, CNC machine, a Dremel, etc., access to a hardware store with some imagination and not much talent can create a firearm all the way up to a self-repeating gun (fully automatic/machine gun).

Someone needs to challenge automatic/machine guns under the currently laws.

I for one don't have a need for a machine gun or a fully automatic gun, but they should be publicly accessible to those that entertained to want one freely.

Also I see it infringing on people's other constitutional rights.
Click to expand...

all you have to be is a cook and read a recipe .... "boston" ... needed no 3d printer ..
 
You must log in or register to reply here.
Top