Guys - is it still legal/possible to build an AR in NY/CT?

zorro

zorro

.44 mag
Messages
856
Reaction score
1,419
Location
Usa
Honestly, losing track of what I can still do in these Nazi states

My son would like to build an AR ……..I was not sure if we can still get lowers without the ATF and SWAT teams coming through my roof

If we can, can anyone recommend a build for around $1000……complete rifle ( worry about the scope later)

And any good places to order online…….only place I have used is Buds

Basic 223/556 build
 
Tisto

Tisto

.308 Win
Messages
4,302
Reaction score
7,228
Location
Tonawanda
The two rifles pictured in the thread "New .204 rifle being built" in this section were built for $ 1000 each. I could have saved a few hundred on each of them, but I used specific parts for a reason.

You can still buy a lower receiver. All the rest of the parts can be purchased online.

I bought the barrels, CMC triggers, charging handles linear compensators and gas tubes from JOEBOB OUTFITTERS.

I bought the uppers, upper parts kits, gas blocks, handguards, and pistol grips from MIDWAY.

I got the stocks,buffer tubes, lower parts kits, and bolt carrier groups from PALMETTO STATE ARMORY. With the exception of the BCG's, the rest of those parts came bundled as a builder's kit.

I bought the magazine locks and a few other parts from a local dealer.

You could do a build for a lot less than $1000, depending on what you want.

Be careful about the barrel. Some barrels chambered in .223 Wylde have somewhat tight chambers and can be fussy about ammunition. Unless you need the increased accuracy, stick with a 5.56 NATO chamber. It may save some headaches.

You're likely to run into the Nitride/Melonite/ Stainless dilemma. Do your research first to decide which barrel is right for you.
 
Last edited:
Jem45472

Jem45472

.308 Win
Messages
4,291
Reaction score
6,945
Location
Erie
You can likely build something for about half your budget. I like palmetto State armory for budget builds. Never had an issue with any of there stuff. If I don't buy from them, it's usually primary arms. I also use Anderson stripped lowers pretty exclusively now. They're cheap, but never had one out of spec.

Only issue you have to sort first is which FFL out your way will transfer the lower. It's still legal, but a couple places have posted they won't transfer them.
 
zorro

zorro

.44 mag
Messages
856
Reaction score
1,419
Location
Usa
Thanks very much - appreciated

I will have a look at that thread

Thanks
 
H

Hochulsucks1234

.44 mag
Messages
764
Reaction score
1,812
Location
Ny
I would build now. Can't go wrong with a decent build from Palmetto State. Get one of their hammer forged uppers, maybe upgrade the BCG to a DD or BCM. Add some nice optics. Grab a lower from anywhere (aluminum not plastic), use a good parts kit with a decent trigger. I like using Magpul stocks as well as other furniture from them.

Do it sooner than later. CONgress is ready to push another AW bill. Not sure if it will survive the Senate, but there are a lot of coward Republicans.
 
2WheelGnnr

2WheelGnnr

6.5 Creedmoor
Messages
1,948
Reaction score
2,135
Location
Honeoye NY
Im glad just last year I thought I should get a lower before I cant.....so I got one and then later got the rest of the kit from PSA........for 556 223........I still actually have to put it together but when things settle down....yeah never...

Good luck but yeah Id get them before you cant..I may pick up another stripped lower just to have!!!
 
Vapor

Vapor

.308 Win
Messages
4,868
Reaction score
8,984
Location
Susky county PA
Just thinking of grabbing a lower before the permit nonsense. I think I even have extra parts left.

A lower is blank canvas.
 
Vapor

Vapor

.308 Win
Messages
4,868
Reaction score
8,984
Location
Susky county PA
Well the ffl I was going to get it from just said they are currently not accepting lower receiver transfers or selling them.


Ugg.
 
Jem45472

Jem45472

.308 Win
Messages
4,291
Reaction score
6,945
Location
Erie
Vapor said:
Well the ffl I was going to get it from just said they are currently not accepting lower receiver transfers or selling them.


Ugg.
Click to expand...
Time to find a new FFL. I just purchased a lower for a 7.62x39 build.
 
You must log in or register to reply here.
Top