That_FNG
.308 Win
Happy P320 day!
Happy P320 day!
- Thread starter That_FNG
- Start date
raise you a pair of legions
Beerman
6.5 Creedmoor
Bustedknees
.308 Win
Can't play, I'll catch up with you on July eighth.
I'm not a gunsmith but that's concerning to me.
Beerman
6.5 Creedmoor
Same exact SIG trigger bars, same “675” part number, different results. One trigger bar reacted with “disconnector-like behavior” in both FCUs, and the other trigger bar did not, also in both FCUs. And there’s no way to know what is different about the trigger bars as they measure out in all dimensions to be equal. So, one is “bad” and it’s hard to say exactly why. Unless someone gets inside your FCU while the gun is fully assembled, and forces the sear forward with a hard metal poker, the trigger still must be cycled to get the gun to fire.
Catskillkid
.450/400 Nitro Ex
I have a 320 (plain jane model...not any tricked out ones) that I sent back during the "voluntary, totally not a recall" Sig offered when the issue first cropped up. Haven't had a problem yet. Also haven't dropped it either and it's always only gone bang when I've pulled the trigger. Still it gives me pause and the reason why I don't carry it and rely on it's little cousin, the P365. As far as I know that model has had no issues with drop safety.
WTF did I just watch
Idk. P320's may go off by themselves. lol. Glock owners just shoot themselves.
Sold mine to fund an M&P which I am very pleased with. I'm carrying it this very moment in fact.
On that note in retrospect I think it was a good thing my fullsize P320 was too large for me to ever consider carrying lest I had a 9mm hole bored through my leg.
On that note in retrospect I think it was a good thing my fullsize P320 was too large for me to ever consider carrying lest I had a 9mm hole bored through my leg.
Not sure what they're going to say, but I believe they are sponsored by sig so I can guess it will be very positive. Nothing to see here, its just internet rumors.
Depick
.308 Win
This guy did us all a favor. One less idiot procreating.
Here's a good video with a theory
Catskillkid
.450/400 Nitro Ex
Jesus. Didn't they learn anything from Remington? If I remember correctly they wanted to save something like .30 cents ($30 back in the day adjusted for inflation) for a trigger and created a possibility for the gun going off by barely touching it.
I have both a Remington 700 (manufactured sometime in the 70s) and a Sig P320 (manufactured when they first came out so maybe about 10 years ago now) and haven't had any problems with either. The Sig did go back when they had the voluntary "totally not a recall" and was supposedly fixed.
So now a recall of the recall?? What a mess..
Curious what the details are around this incident and what type of pistol was involved
www.wmbfnews.com
North Myrtle Beach officer accidentally shot himself while responding to Little River shooting, police say
The North Myrtle Beach Police Department released new details on what led to an officer accidentally shooting himself.
www.wmbfnews.com
Facing a wave of P320 lawsuits, Sig Sauer asked for immunity. N.H. lawmakers granted it
The new law has drawn pushback from people who've been injured from unintentional firings of their Sig Sauer pistols.
www.wbur.org
Immunity...
Grayguns Inc on Instagram: "SIG P320 Safety Warning: Confirmed Risk from Incorrect Internal Part Configuration Following a video released by LFD Research on May 19th, Grayguns conducted internal testing to evaluate a potential safety concern involvi
2,136 likes, 239 comments - grayguns on May 29, 2025: "SIG P320 Safety Warning: Confirmed Risk from Incorrect Internal Part Configuration Following a video released by LFD Research on May 19th, Grayguns conducted internal testing to evaluate a potential safety concern involving the SIG P320...
www.instagram.com
Looks like after watching that that the only way it can fire without the trigger being pulled is with the wrong parts installed.Grayguns Inc on Instagram: "SIG P320 Safety Warning: Confirmed Risk from Incorrect Internal Part Configuration Following a video released by LFD Research on May 19th, Grayguns conducted internal testing to evaluate a potential safety concern involvi
2,136 likes, 239 comments - grayguns on May 29, 2025: "SIG P320 Safety Warning: Confirmed Risk from Incorrect Internal Part Configuration Following a video released by LFD Research on May 19th, Grayguns conducted internal testing to evaluate a potential safety concern involving the SIG P320...
Super interesting, thanks for the post.
Seems like a shifty play by Sig.