NYGF Long Gun Pictures Gallery: Show off your Rifles and Shotguns !

[Sweetyzfd]

 

[4WHLDRFTN]

Picked up another Reising 65 Garand trainer

 

[gun_slinger_boy]

Big boy transformer is coming along.

 

[gun_slinger_boy]

Got the barrel pressed in, drilled and pinned with a nice tight headspace and the rear sight tower pressed on. The bolt carrier is gliding like glass and the dust cover is a nice tight (and easy) fit. Just gotta press on the gas block and front sight tower, drill and pin everything and it's pretty much done.

 

[4WHLDRFTN]

Got the barrel pressed in, drilled and pinned with a nice tight headspace and the rear sight tower pressed on. The bolt carrier is gliding like glass and the dust cover is a nice tight (and easy) fit. Just gotta press on the gas block and front sight tower, drill and pin everything and it's pretty much done.

View attachment 171416

View attachment 171417

Polish ?

 

[gun_slinger_boy]

Polish ?

Yes. 1981 Circle 11 all matching parts.

 

[4WHLDRFTN]

Yes. 1981 Circle 11 all matching parts.

Mossberg bbl? I drill an 1/8 gas port in all of mine… still a bit overgased

 

[gun_slinger_boy]

Mossberg bbl? I drill an 1/8 gas port in all of mine… still a bit overgased

All Polish. FB Chrome Lined Hammer Forged "Sporter" Barrel 16" These are new production concentric to boar threads made with modern tech/machinery. I have one of these in my 1775 clone and it's 1 MOA with steel cased ammo. The barrels are top notch. I use a #30 bit to do the gas port. Gas Port Extended Drill Bit It's about as perfect as you can get for the port size. I have a KNS piston in the 1775 and it needs very few to no clicks of adjustment depending on what ammo I use. I'm actually thinking about swapping it out and putting it in an AK that actually needs it.

 

[4WHLDRFTN]

an Izzy & Tula i just did All matching ‘68’s used Romanian bbls on these

 

[gun_slinger_boy]

an Izzy & Tula i just did All matching ‘68’s used Romanian bbls on these

View attachment 171487View attachment 171488

Get a little nervous working on those trunnions? Those kits aren't cheap. At all!

 

[4WHLDRFTN]

Get a little nervous working on those trunnions? Those kits aren't cheap. At all!

make sure you check bbl journal size, most bbls are over quite a bit (.006-.010). Should only have .002 interference on all journals
always sand the bbl journals .. not the parts

 

[gun_slinger_boy]

make sure you check bbl journal size, most bbls are over quite a bit (.006-.010). Should only have .002 interference on all journals
always sand the bbl journals .. not the parts

Everything I've touched so far went on buttery smooth. The FB barrel is a 2 and the trunnion on the 81 is a 2. I guess the Polish are really good at keeping tolerances even 40 years later. Haven't really had to hit anything with the red scotch brite. What is that laser you're using? Does it index off the hammer? Seems like a really nice way of lining everything up. That Romanian I posted a few pages back was done by eye and using flat surfaces. I only had to adjust the post for height. Not bad since I hadn't played since I believe 2013.

 

[4WHLDRFTN]

Everything I've touched so far went on buttery smooth. The FB barrel is a 2 and the trunnion on the 81 is a 2. I guess the Polish are really good at keeping tolerances even 40 years later. Haven't really had to hit anything with the red scotch brite. What is that laser you're using? Does it index off the hammer? Seems like a really nice way of lining everything up. That Romanian I posted a few pages back was done by eye and using flat surfaces. I only had to adjust the post for height. Not bad since I hadn't played since I believe 2013.

Just a laser lever hung above The laser is staight from frt sight-stock screw in rear trunnion Stamped can get the “banana twist “ if you do the swell rivets wrong

 

[4WHLDRFTN]

Heres a Type 3 PLO i did recently ..

 

[FRANKIE]

Do you folks headspace to CIP or SAMMI ?
(Speaking in the 7.62x39 /5.45x39 calibers?

 

[gun_slinger_boy]

My gauges are CIP.

 

[FRANKIE]

My gauges are CIP.

Definitely best choice for that application.

 

[gun_slinger_boy]

Not sure if enough cosmoline was put in this plastic part.

 

[gun_slinger_boy]

Done. Breaking out the paracord.

 

[ryguy]

 

[S&W Fan]

Spent an hour or so cleaning up my newest acquisition. A beautiful Remington Mod. 541-T
The stock was somewhat dirty but some elbow grease and old English furniture polish took care of that. The barrel cleaned up very nice and the exterior of the rifle has very little issues with it.

 

[Bustedknees]

I have a safe queen that I'm thinking of selling or trading to fund a new build. I bought it thinking it would be a nice gun to carry on the atv but I could never bring myself to putting a scratch on it. It has only served as a house gun for shooting critters from the windows . Searches turn up very little and others are too old to be accurate in today's market. The gun is a cherry condition H&R ULTRA in the 25-06 Remington. l'd guess less than 60 rounds through it. I won't put much value to the 3-9x50 illuminated scope.

 

[FP1201]

Heres a Type 3 PLO i did recently ..
View attachment 171498View attachment 171499View attachment 171500View attachment 171501View attachment 171502View attachment 171503

I've got a Milled Tortorte Chinese receiver with a new barrel stuck about half way in... put the kit away a couple years ago, maybe it's time to drag it back out, might have to split the receiver trunnion and tig it back together.

 

[Dynamite94]

Picked up my grail rifle yesterday. Don’t really know where to go from here.

 

[BlueHat12]

Picked up my grail rifle yesterday. Don’t really know where to go from here.View attachment 183500

holy WOAH that's beautiful.

 

[pramaglia]

Many years ago my house was robbed and they stole my Voere Shikar .308 and a Winchester 16 ga. pump shotgun. They left my 1937 Erma single shot .22. I have been replacing what was stolen little by little and then some. I replaced the shotgun with a Beretta semi-auto 12 ga., the Voere with a Mossberg Patriot Revere in .308 and before they ban them again, I bought a Savage MSR with the .223 Wylde barrel. I also picked up a CZ 457 American.

 

[S&W Fan]

Many years ago my house was robbed and they stole my Voere Shikar .308 and a Winchester 16 ga. pump shotgun. They left my 1937 Erma single shot .22. I have been replacing what was stolen little by little and then some. I replaced the shotgun with a Beretta semi-auto 12 ga., the Voere with a Mossberg Patriot Revere in .308 and before they ban them again, I bought a Savage MSR with the .223 Wylde barrel. I also picked up a CZ 457 American. View attachment 185669View attachment 185671View attachment 185672View attachment 185673View attachment 185674

NICE ! There’s just something about wood furniture and blued steel that tickles my fancy.

 

[S&W Fan]

I Recently acquired this Remington mod. 700 in 300 Ultra Mag ( RUM ) The gun came with about 60 rnds. Of Ammo too.
I haven’t decided on what glass I’ll put on it yet, or if I’m even going to keep it. It’s a real thumper for sure. Should be no problem getting out to 1000 yrds though!

These photos don’t really do this beautiful rifle justice

 

[FRANKIE]

I Recently acquired this Remington mod. 700 in 300 Ultra Mag ( RUM ) The gun came with about 60 rnds. Of Ammo too.
I haven’t decided on a what glass I’ll put on it yet, or if I’m even going to keep it. It’s a real thumper for sure. Should be no problem getting out to 1000 yrds though!
View attachment 188011View attachment 188012View attachment 188013
These photos don’t really do this beautiful rifle justice

1500 yards on that one.
Barrel length?

 

[S&W Fan]

1500 yards on that one.
Barrel length?

26” target crowned barrel