My Fightlite SCR build

[PA Guns & Ammo]

Just thought I would share my Fightlite SCR build. I know a few of you built some of these. So for those who are interested, I can give you my assessment of the lower. I have read these had terrible triggers but mine does not. To me it feels like a 4.5-5lb trigger. Not much creep. Now since these use a special bolt carrier, the upper comes off a little differently than your your standard AR15. You have to pull both pins out and pull the upper forward a hair and lift it out. Not a big deal. To operate the charging handle is a little more difficult than the AR15 because of where your hand placement is due to no pistol grip. I think I'm going to convert it to a side charging handle. If any of you have any personal experience with any, let me know.

 

[nortatoga]

Very nice! I changed the charging handle to a larger one as it was hard to work with the scope mounted.

 

[Edwardteach72]

I think the only thing I'm bummed about with the scr is the mag release. Its a minor issue I just wish the found a way to have it work like a standard ar15 maybe make their own extended idk.


Build looks good (all things considered lol)

 

[nortatoga]

I think the only thing I'm bummed about with the scr is the mag release. Its a minor issue I just wish the found a way to have it work like a standard ar15 maybe make their own extended idk.


Build looks good (all things considered lol)

I put a Troy Industries ambi-release on mine also, just push out the roll pin and flip it reinstall roll pin, works well doing mag changes left handed.

 

[Edwardteach72]

I put a Troy Industries ambi-release on mine also, just push out the roll pin and flip it reinstall roll pin, works well doing mag changes left handed.

View attachment 81566

I remember you bringing that up, makes for a solid option and why I still keep checking out scr builds

 

[PA Guns & Ammo]

I put a Troy Industries ambi-release on mine also, just push out the roll pin and flip it reinstall roll pin, works well doing mag changes left handed.

View attachment 81566

That is a great idea!!

 

[nortatoga]

Midway USA has them in stock, I think I got mine direct from Troy but there site is not coming up.

Troy Industries AR-15 Mag Release Ambi Matte

The Troy industries ambidextrous magazine release provides left side release that is similar in size and operation of the standard release. Excellent...

www.midwayusa.com

 

[dsdmmat]

I have three SCRs and two spare SCR bolt carriers. They are a nice option in communist states. Not sure if I am going to keep all three now that I have moved out of NY.

 

[nortatoga]

I have three SCRs and two spare SCR bolt carriers. They are a nice option in communist states. Not sure if I am going to keep all three now that I have moved out of NY.

By looking at their site it seems the no longer offer the composite stocks, I could be mistaken but your's may be in demand?

 

[dsdmmat]

By looking at their site it seems the no longer offer the composite stocks, I could be mistaken but your's may be in demand?

Yep all three are the composite Monte Carlo stock too.

 

[Marine Cpl]

Looks clean. Very good option for NY. Definitely the safest route for a featureless build if one doesn’t want to put up with any potential BS.

I believe @RooftopKorean did a build with a side charger that didn’t utilize the SCR bolt and recoil system where both were built into the upper itself.

 

[Edwardteach72]

Looks clean. Very good option for NY. Definitely the safest route for a featureless build if one doesn’t want to put up with any potential BS.

I believe @RooftopKorean did a build with a side charger that didn’t utilize the SCR bolt and recoil system where both were built into the upper itself.

He did one with BRN-180 which requires some modification

 

[RooftopKorean]

He did one with BRN-180 which requires some modification

Had to modify the BRN-180 upper some. If you want to use a stock like the Magpul SGA870 or something that cannot accommodate the recoil system you will need to make a thread adapter for the stock but it will allow you much more options.

I also bent the Magpul BAD lever some in order to get it to work on the SCR and bought a faux flash hider and had it pinned since the BRN-180 has a scary feature - threads.

 

[PA Guns & Ammo]

By looking at their site it seems the no longer offer the composite stocks, I could be mistaken but your's may be in demand?

Remington has been on the fritz and I suspect that is where they were getting them from. I go believe the wood stocks they get from Boyd's stocks.

 

[nortatoga]

Remington has been on the fritz and I suspect that is where they were getting them from. I go believe the wood stocks they get from Boyd's stocks.

That would make sense, it is a 870 stock. Enjoy your's!!

 

[CarpNY]

Looks clean. Very good option for NY. Definitely the safest route for a featureless build if one doesn’t want to put up with any potential BS.

That's how I ended up here:

Doesn't get any NYSAFEr than that.

That would make sense, it is a 870 stock. Enjoy your's!!

Technically, 1100, since that already accommodates a similar recoil system. While most 1100 stocks will fit 870s (the 1100 being a successor to the 878, which was in essence a gas-operated 870, this makes sense), the opposite is not true (see, for example, the Magpul SGA.)

 

[PA Guns & Ammo]

That's how I ended up here:
View attachment 81736
Doesn't get any NYSAFEr than that.


Technically, 1100, since that already accommodates a similar recoil system. While most 1100 stocks will fit 870s (the 1100 being a successor to the 878, which was in essence a gas-operated 870, this makes sense), the opposite is not true (see, for example, the Magpul SGA.)

I originally wanted a walnut stock but my distributor only had the gray laminate. I can always go to Boyd's and get a stock. How is your trigger in yours? I read a lot of complaints but mine is really nice.

 

[CarpNY]

I originally wanted a walnut stock but my distributor only had the gray laminate. I can always go to Boyd's and get a stock. How is your trigger in yours? I read a lot of complaints but mine is really nice.

Both of mine are Ares-branded, but just after the initial batch with the terrible triggers. I also dropped in JP reduced-power hammer springs. They're not precision triggers, by any means, but they are decent. At least as good as Mil-Spec.

 

[wtf7301]

Is that a Midwest Industries .223 wylde upper? I think I'm going with similar build. Got that upper 100 bucks cheaper on a Brownells sale a few weeks ago.

 

[ArmedCorgi]

I remember you bringing that up, makes for a solid option and why I still keep checking out scr builds

I would rather use one like this. No need to mount it upside down. I have one like this (different brand) on my featureless build. AU Ambidextrous AR15/M4/M16 Magazine Release

Edit*** This is the one I have. Much more expensive, but top quality. Ambi-Catch™ for M16, M4, AR-15 and Colt® 9mm Carbine | Norgon, LLC

 

[nortatoga]

I would rather use one like this. No need to mount it upside down. I have one like this (different brand) on my featureless build. AU Ambidextrous AR15/M4/M16 Magazine Release

Had I seen that I may have gone that route, plus it's cheaper!!

 

[ArmedCorgi]

Had I seen that I may have gone that route, plus it's cheaper!!

Yeah, I had bought it so long ago I forgot the brand. Mine is a Norgon. Much more expensive than the first one I listed, but great quality. Ambi-Catch™ for M16, M4, AR-15 and Colt® 9mm Carbine | Norgon, LLC

 

[PA Guns & Ammo]

Is that a Midwest Industries .223 wylde upper? I think I'm going with similar build. Got that upper 100 bucks cheaper on a Brownells sale a few weeks ago.

No, just the hand guard is Midwest.

 

[PA Guns & Ammo]

I would rather use one like this. No need to mount it upside down. I have one like this (different brand) on my featureless build. AU Ambidextrous AR15/M4/M16 Magazine Release

Edit*** This is the one I have. Much more expensive, but top quality. Ambi-Catch™ for M16, M4, AR-15 and Colt® 9mm Carbine | Norgon, LLC

Looks like I will be ordering one of those.

 

[CarpNY]

Yeah, I had bought it so long ago I forgot the brand. Mine is a Norgon. Much more expensive than the first one I listed, but great quality. Ambi-Catch™ for M16, M4, AR-15 and Colt® 9mm Carbine | Norgon, LLC

Both of mine were ordered years ago, too, but I used the KAC one. If you have reasonably long fingers, works great. The price on that AU one is intriguing. It's clearly a direct reproduction of Norgon's, but at 1/3 the price (that usually rings bells for me, as meaning a Chinese-brand copy.) I'd have to try one to see if it works as easily for me.

 

[ArmedCorgi]

The price on that AU one is intriguing. It's clearly a direct reproduction of Norgren's, but at 1/3 the price (that usually rings bells for me, as meaning a Chinese-brand copy.) I'd have to try one to see if it works as easily for me.

I agree. Or that brand is for airsoft or some shit like that. I know nothing of Arms Unlimited.

 

[nortatoga]

I agree. Or that brand is for airsoft or some shit like that. I know nothing of Arms Unlimited.

AU AMBIDEXTROUS AR15/M4 MAGAZINE RELEASE
DESCRIPTION:
Now both right and left hand shooters can get faster, easier reloads while keeping the rifle on target. A distinctive design that is the same size and configuration as the factory part; won't snag, resists accidental release and does not interfere with rifle function but allows you to activate the magazine release with the thumb of the non-firing hand. Drop-in installation. 100% designed and manufactured in the USA with a lifetime replacement warranty!

FEATURES:

• 12L14 Solid Billet Steel
• Compatible with all AR15/M4/M16 rifles
• Installs the same as a factory magazine release
• Utilizes the original magazine release button
• Thoroughly tested and used as an OEM Part by Colt

I may order one of these myself.

 

[CarpNY]

100% designed and manufactured in the USA

Yeah, by Norgon. Colt Canada uses Norgon's patent for theirs, which is why they say "Thoroughly tested and used as an OEM Part by Colt." All a little misleading, and the price makes me wonder if they skimped on the manufacturing.

 

[nortatoga]

Yeah, by Norgon. Colt Canada uses Norgon's patent for theirs, which is why they say "Thoroughly tested and used as an OEM Part by Colt." All a little misleading, and the price makes me wonder if they skimped on the manufacturing.

You could be right!

 

[ArmedCorgi]

Well, with a lifetime replacement warranty, for $25 how could you go wrong? If it ends up being crap, at least it didn't break the bank. The Norgon ones are solid though.