96coal449
.308 Win
Kabar is a great blade. Which version are you possessing? I have the older one with leather stacked handle.
Need a daily knife
- Thread starter Edwardteach72
- Start date
Vapor
.308 Win
A rat 1 is $40 in d2..
A delica will run yah about $60-70.
A mini griptilian will go for $70-90.
A bugout is about $119. Is about one of my favorite edc.
But my favorite? An endura. Slim, light, quality, and long...you know, for reasons.
Don't go with some nonsense knife.
A delica will run yah about $60-70.
A mini griptilian will go for $70-90.
A bugout is about $119. Is about one of my favorite edc.
But my favorite? An endura. Slim, light, quality, and long...you know, for reasons.
Don't go with some nonsense knife.
livingston
20×102mm Vulcan
mark 1 Mark I
many folks on these survival forums talk about batoning trees ect... They need a hatchet or axe ... Just abusing an instrument. otherwise
Last edited:
Bananabandit
.338 Win Mag
Did you pick one out yet?
We need to critique your spending decisions.
We need to critique your spending decisions.
I've got too many to count, and as posted previously, I'm a bit of a knife snob, lol. Cheap is cheap...!
That said, they all cut the same (if kept sharp). So really is a matter for use and style, or function over form.
Kershaw's that I have are, and have been, workhorses. Benchmade and Spyderco are very good commercial made knives, some variations with excellent materials, but for those you'll pay more.
I would venture more to the $100-150 end and you'll find blades with better steel, locking mechanisms, etc.
My favorite (work) knife is the Spyderco Techno-2 CTS-XHP, it's not an assist opening, but made from tool steel and I've barely sharpened it in the years I've used it. Not even sure you'll find any out there (2012 design), but if you can, is worth it's price.
Otherwise...
For me, I don't carry work knives, and if ever asked, I "only" carry work knives
lol
Knives are made for a purpose, and all my knives have their purpose! Ones for cutting boxes shouldn't be expected to do other things, or you might get disappointed when they don't. Knives that aren't for cutting boxes are "razor" sharp "always"...
That said, they all cut the same (if kept sharp). So really is a matter for use and style, or function over form.
Kershaw's that I have are, and have been, workhorses. Benchmade and Spyderco are very good commercial made knives, some variations with excellent materials, but for those you'll pay more.
I would venture more to the $100-150 end and you'll find blades with better steel, locking mechanisms, etc.
My favorite (work) knife is the Spyderco Techno-2 CTS-XHP, it's not an assist opening, but made from tool steel and I've barely sharpened it in the years I've used it. Not even sure you'll find any out there (2012 design), but if you can, is worth it's price.
Otherwise...
For me, I don't carry work knives, and if ever asked, I "only" carry work knives
lolKnives are made for a purpose, and all my knives have their purpose! Ones for cutting boxes shouldn't be expected to do other things, or you might get disappointed when they don't. Knives that aren't for cutting boxes are "razor" sharp "always"...
vanderblack
.357 mag
After losing a few costly knives, I went with a simple Gerber Skeleton knife. You can pick one up anywhere between $12 and $20. I have kept this one in my pocket for over 4 years and use it almost every day. It holds an edge and is fairly easy to sharpen. It is available in both serrated and straight edge.
Gerber Paraframe I Knife, Serrated Edge, Grey [22-48445]
Gerber Paraframe I Knife, Serrated Edge, Grey [22-48445]
i say for EDC, get a knife you can afford to lose.
because over the 35 years of carrying knives and Leathmen, they go missing every so often.
I am a huge Spyderco fan, because they make knives with available with different steels.
many under $100
UKPK for NYC
Para3 LW for non city
Endura for sportsmen stuff
because over the 35 years of carrying knives and Leathmen, they go missing every so often.
I am a huge Spyderco fan, because they make knives with available with different steels.
many under $100
UKPK for NYC
Para3 LW for non city
Endura for sportsmen stuff
This is the plain edge they also have a partially serrated version
Kershaw Blur Black (1670BLK) Everyday Carry Pocketknife with 3.4" Stainless Steel ... https://www.amazon.com/dp/B0009VCA0I/ref=cm_sw_r_sms_c_api_i_oqQcEbS4JKHV6
Kershaw Blur Black (1670BLK) Everyday Carry Pocketknife with 3.4" Stainless Steel ... https://www.amazon.com/dp/B0009VCA0I/ref=cm_sw_r_sms_c_api_i_oqQcEbS4JKHV6
Saltwater60
20×102mm Vulcan
While I like benchmade I can not say anything good about their customer service. I had the same issue with the clip and I was worried about losing my $240 knife. I emailed their customer service and received no response, emailed again and no response. I commented 2-3 times on their twitter account and no response. I bought a titanium one off amazon for $25.00 and it’s way better than their provided clip.
96coal449
.308 Win
WOW! Really? I found the total opposite. I have to think here for a minute how long ago it was. Guessing a year from last Oct. so, close to 18mons? Give or take? Was your experience before then? After? My return reply was prompt. Done by email. Even though I knew they were responsible for the faulty clip .....I wrote that I loved my knife and stopped carrying it do to the broken clip. I asked where I could purchase another and the reply said just give us your address and we'll send you another. within 3-4 days I received another with new screws. I replied to same email that it was received and I was carrying again. Mentioned a 2nd time how much I loved my knife and thanked for the excellent service and quality knive. Another reply back ......Thank you for choosing Benchmade we are glad you like our products.I'm truly sorry you had such a bad experience while I feel like I was put in the spotlight while dancing on broadway.
At least the NRA holds on to the tradition of being the worst.
And, you know, that little “anti gun stunt” they pulled a few months ago.
Last edited:
LMS
.357 mag
I bought this CRKT Ken Onion Eros a few months ago from BladeHQ, and am liking it a lot. $50 I think. Mash the link below for a video.
CRKT Ken Onion Eros
CRKT Ken Onion Eros
96coal449
.308 Win
Are you fuckin shiting me? Why is it every time I find a little bit of happy place, someone, (not you darth), has to fuck it up for me? Now I gotta fuckin boycott them too? WTF This shit is just too mother fuckin much.
2nd Amendment Supporters Outraged After Benchmade Helps Police Destroy Guns
A recent spat involving Benchmade Knife Company, the Oregon City Police Department, and incensed Second Amendment advocates put the American-made knife manufacturer in the political crosshairs.
gearjunkie.com
Now, don't get me wrong. I have wanted a Griptillian for a while. And will probably get one eventually. But that was a dumb move on their part.
kev74
20×102mm Vulcan
Oh, come on!!!! Its not like they were literally cutting up guns that could have been sold legally legally to fund social programs or boost their budget, right.2nd Amendment Supporters Outraged After Benchmade Helps Police Destroy Guns
A recent spat involving Benchmade Knife Company, the Oregon City Police Department, and incensed Second Amendment advocates put the American-made knife manufacturer in the political crosshairs.
Now, don't get me wrong. I have wanted a Griptillian for a while. And will probably get one eventually. But that was a dumb move on their part.
Ohhhh... they were.
...aaaaand donating that money to anti gun politicians. =/Oh, come on!!!! Its not like they were literally cutting up guns that could have been sold legally legally to fund social programs or boost their budget, right.
Ohhhh... they were.
kev74
20×102mm Vulcan
But he said in the interview it was just a part of doing business! That makes it alright, right???
Benchmade certainly "did their business" all over their gun owning fans that day.But he said in the interview it was just a part of doing business! That makes it alright, right???
96coal449
.308 Win
Now it's like this.....just like Walmart.
FUCK Benchmade.
And a Happy fuckin new year.
Fuckady fuckin fuck, fuck FUCK!
Carry on......
FUCK Benchmade.
And a Happy fuckin new year.
Fuckady fuckin fuck, fuck FUCK!
Carry on......
96coal449
.308 Win
@Edwardteach72 DON"T buy Benchmade.
This is not a threat. It's a plea.
Anyone have a new EDC for me? I just launched mine across the room. Seriously. The misses is looking at me with a WTF expression.
Although she knows it's anti-gun related.
This is not a threat. It's a plea.
Anyone have a new EDC for me? I just launched mine across the room. Seriously. The misses is looking at me with a WTF expression.
Although she knows it's anti-gun related.
kev74
20×102mm Vulcan
Don't throw it away. Just don't buy any more.
Yea I remember their bull shit which is alright because I've decided not to spend benchmade monies for something that will sit in my pocket for evers
96coal449
.308 Win
I won't. I spent to many valueless little paper rectangles on it.
I lost my pride of carrying it. I seriously want a different knife now. In fact I'm going to send another email. There will be no good review.
Time to go back and re read this entire thread for suggestions.
Hey wait a minute. Where did I put that Ka-Bar....
Put it in a potato gun.
96coal449
.308 Win
You're not that far away.
Spyderco.
96coal449
.308 Win
Ya know what? I know how to fix this. Tomorrow I'll stop back at my LGS and pick me out a Spyderco that I just saw @SomeSoldier pop up above my typing. I stopped there today for the heck of it to shoot the shit with my friend, the owner. And while I'm there, I'll put a DP on the heavy 20'' barreled remmy in the Magpul chassis/bipod in FDE. Now don't tell me about the remmy shit. I can't afford the fluted FN SPR that I really want.
At least I can get the .308 remmy and it goes boom.
FUAC
I feel a little better already.
At least I can get the .308 remmy and it goes boom.
FUAC
I feel a little better already.
kev74
20×102mm Vulcan
That's the only reasonable thing to do.Ya know what? I know how to fix this. Tomorrow I'll stop back at my LGS and pick me out a Spyderco that I just saw @SomeSoldier pop up above my typing. I stopped there today for the heck of it to shoot the shit with my friend, the owner. And while I'm there, I'll put a DP on the heavy 20'' barreled remmy in the Magpul chassis/bipod in FDE. Now don't tell me about the remmy shit. I can't afford the fluted FN SPR that I really want.
At least I can get the .308 remmy and it goes boom.
FUAC
I feel a little better already.