That doesnt look bad at all, possible more comfortable than the regular monte carlo. Thanks.
Who Has an SCR???
- Thread starter Wildman1024
- Start date
That doesnt look bad at all, possible more comfortable than the regular monte carlo. Thanks.
nortatoga
.338 Win Mag
It comes with 5 different foam inserts of different thickness's for a custom cheek-weld.
mca90guitar
.357 mag
Where did you order from?
Dealer off of Gunbroker . Kerri's guns.
mca90guitar
.357 mag
Thanks
Marine Cpl
.577 Tyrannosaur.
There’s nothing in NY or NYC city law that mentions length of handguard at all.
Thanks
I vote red dot. For $300 you have a wide choice of solid options including but not limited to brands such as Vortex, Primary Arms and Holosun. If you can stretch out to about $350 you can select from a range of prismatic scopes from the same manufacturers with fixed magnification from 1x to 4x. For a budget variable I would look at something like a Vortex Strike Eagle if you want bells and whistles. Of you want to spend less I would skip the illumination so you can get into a simpler quality scope from the likes of Nikkon or Leupold has some nice value optics of that type as well. I would avoid the off brand mystery Amazon scopes like the plague. Also consider that first focal plane scopes are typically more expensive than equivalent second focal plane scopes and that FFP often suffer from dim illumination.
Low power scope 1-4 or 1-6
Thank . I was intrigued by the fixed 3X Vortex spitfire prismatic red dot, but I wear glasses as it it and I heard it has a short field of view
What kind of shooting do you plan on doing primarily? At what distance? What will the primary use of your shiny new SCR be?
Probably a low powered variable then.
They work but are less versatile than a 1-4x or 1-6x LVPO Imho
Leopold seems to have made a entry level AR model that looked nice but seems discontinued. Way too many choices ;-)
Strike eagle is supposed to be a pretty good for the money entry LVPO
Vortex Optics Strike Eagle 1-6x24 Second Focal Plane Riflescope - BDC Reticle (MOA) with Vortex Hat https://www.amazon.com/dp/B07MMNGQD2/ref=cm_sw_r_cp_apa_i_y.uADb8DJR35Y
For a quality, lower cost mount The Aero Precision mount is a good one. Light too.
Do not cheap out on the mount.
Aero Precision Ultralight 30MM Scope Mount, SPR https://www.amazon.com/dp/B00JVTD4EK/ref=cm_sw_r_cp_apa_i_FcvADbEHBAEG8
For a quality, lower cost mount The Aero Precision mount is a good one. Light too.
Do not cheap out on the mount.
Aero Precision Ultralight 30MM Scope Mount, SPR https://www.amazon.com/dp/B00JVTD4EK/ref=cm_sw_r_cp_apa_i_FcvADbEHBAEG8
Last edited:
So I am leaning towards the Primary Arms series 1-6x gen 3 for $289, but I'm really curious is it worth it and justifiable for me to consider the 2x price at $599 for the highly rated Vortex Viper PST 1-6x? Not to be confused with the strike eagle.
What is the comb height of the Monte Carlo equipped SCR as opposed to a standard AR stock?
Is it lower or higher? I find the comb height of a Magpul CTR to be too low with the standard 1.5"ish ring height. I must have high cheek bones or something. Or else I just prefer to get lower on the rifle than most.
So My Fightlite SCR arrived at my FFL, picking up any day now, Got a super low price on the Vortex strike eagle 1-8x with offest mount for $279 and will mount that asap.I have two planned mods and since I'm not familiar with this platform I wonder which ones I can do, or just have the store do it. 1st, I want to add a floating Mlok handguard ro if necessary a similar magpul. Can I do this myself, Videos are confusing and none specifically for the SCR and second I'd love to see if I could install the Magpul SGA stock as I've seen someone else do. Any thoughts. Photos will be posted as soon as I get it. Stoked. Need some frangible ammo for my range unti I can get to outddor range. Thanks,
I purchased a Magpul SGA to do a test fit and it's not possible without a lot of fabrication. The mounting bolt hole is not angled right in order to widen the hole in order to put the recoil tube/spring assembly through. If you planned to go through a different angle you would need to get a shorter recoil tube/spring similar to the one used in the Fightlite Raider and even then you would run into the issue of having to avoid the crossbolts.
Thanks, Bummer.
1075tech
.338 Win Mag
I might have missed it skimming through the last 7 pages, but... Has anyone tried these with a pistol caliber? Anyone have a PCC upper they would try?
I had an SCR lower, sold it, and today picked up another at LGS on a whim. Now just have to figure out what to do with it.
I had an SCR lower, sold it, and today picked up another at LGS on a whim. Now just have to figure out what to do with it.
The non rotating one piece BCG would be the part that would not allow it to work unless it was cut in half and modified to take the tail piece of the SCR
nortatoga
.338 Win Mag
Not to tell someone what to do with their $. But that would be an expensive 9mm carbine as the SCR lower's are around $600.00. I would suggest you try shooting a Ruger PC9 which can be bought for around $600.00 (I own both!) and go in a different direction with the SCR lower JMHO!
1075tech
.338 Win Mag
I was just curious.
I have an idea of what I want to do with it. Probably going to do a side charge upper. Maybe another Grendel.
I have an idea of what I want to do with it. Probably going to do a side charge upper. Maybe another Grendel.
nortatoga
.338 Win Mag
I do like that side charging upper!!