NYGF Long Gun Pictures Gallery: Show off your Rifles and Shotguns !

[RandyMarsh]

How do you like that KSG? I thought about getting one a while back because it's nice and compact.

it is sweet. It is super small and compact. Pump is smooth, perfect home defense length. Pistol grip feels much more natural than regular shotgun. The tubes holds more than the Mossberg too, can get 7+7 of 2.5inch in there, can only fit 6 in the Mossberg.

i've seen it for dirt cheap on Palmettostatearmory, like $350 or $370. I paid $460 about 8 months ago

Couple more pics of it:

 

[gun_slinger_boy]

Ready for resurrection.

 

[kev74]

I don't shoot this one enough!

 

[kev74]

I just freshened up the stock on my Rossi 94. It looked ok before, but they left the grain open enough that it would grab my beard hairs when I shot.

I added a bit of stain/color and a few coats of tung oil. Finished with a bit of Renaissance Wax.

 

[Bustedknees]

I had two but sold mine, kept my dads.
A late 70's Topper Buck model 162 , 12 gauge. They hurt..

 

[S&W Fan]

I had two but sold mine, kept my dads.
A late 70's Topper Buck model 162 , 12 gauge. They hurt..
View attachment 255850

Talk about hurt . I had the 3” 10 ga. Model with the same length barrel. That sucker could cut down a 4” sapling and leave a bruise on your shoulder for a month !
I traded it and $50 to a vendor at the Syracuse gun show for a marlin 336

 

[Bustedknees]

Haven't seen one in years around me. But if you remember those traveling Chinese tool shows they always had dirt cheap pellet guns. This one is from the 90's. I think they were $10- 20's top. I sent this one to the chopsaw and took some of the forearm off then did a sand and refinish . They hit pretty damn hard too.

 

[upstatejoe]

Had my winchester 1885 low wall out for a wipe down yesterday. It's in .32-20

 

[S&W Fan]

Had my winchester 1885 low wall out for a wipe down yesterday. It's in .32-20

That is a thing of beauty right there !

 

[Bustedknees]

Western Auto Revelation model 100A. This old gun was one of the few that was still kicking around when my grandfather died back in 96. It sat in the shadow's when my dad kept it hid for its ugliness. Someone long ago butchered it with a wood burning tool. It had a really shitty rose carved into the forearm, then what I think was someone's attempt at a beaver burnt into the stock. Years later in 2005 , the summer my dad knew it was last, he didn't like me sitting at the table with him watching him die. He sent me out to his garage with all kinds of stupid projects. At this point the ugly gun was collection lots of dust in his shop and we had talked about giving a redo in the past but never agreed on ideas. So with complete control I went my way with it. The stock went straight to the chopsaw removing a good 6 or 8 inches with a small back cut like some old Weatherbys. This totally did away with the rose burning. The remainder went to my dads flap sander removing all the varnish and thinned down the rear stock untill I made it beaverless. It was coming along nicely but looked silly with such a short forearm so out came the hacksaw to bring the barrel down to 16.75". No crowning tool so it still is flush and unblued which looks good. I can't recall what I did with the front site, but added the super high end BSA optic to it. The maple stock got a Minwax honey gel stain. Not wanting to spend weeks we didn't have to do the hand rubbed linseed oil top finish I have it a satin poly over.
If I remember correctly dad died before I was done but he saw the rough finish. So 20 years ago he died on my oldest sons birthday. Today I'm passing it along to him to keep his critter problems in control.

 

[dean3690]

Here's a few!

A '21 SP3, that in the past month, I've shot exactly 350 times, up at Orvis Sandanona for sporting clays.
A '19 Mossberg Shockwave 500 Chainsaw, that I converted to full tactical.
A '64 Belgian Browing light 12, that my old man handed down to me.
A '60 era Ruger .22 (another hand me down and first gun I ever shot at 5 or 6 yrs old).

PS: the Browing and Ruger are at the house in Suffolk, so had to pull down pics from the net....

IMHO, a rounded pistol grip cap on a wood shotgun stock is the cat's meow. It's a real bygone era detail that you see on the older Browning A-5 or Remington copies and other assorted older shotguns.

 

[pramaglia]

Bought a new scope for my CZ 457 American. It's an Athlon 4-16x40mm with the illuminated BDC600 reticle and it also has parallax adjustment. I took the Leupold Freedom 3-9x40mm off the CZ and put that scope on my Ruger 10/22.

 

[kemo357]

Mosin’s are neat.

 

[REF]

Literally pulled the trigger on this A bit pricey for but no one makes shotguns like the Italians

 

[FP1201]

Literally pulled the trigger on this View attachment 276032A bit pricey for but no one makes shotguns like the Italians

Beretta 1200, and 1201's are a favorite...I have several Italians.

 

[pramaglia]

Took the girls out of the safe for a group photo.

 

[Bustedknees]

Finished up the Blunderbuss last night. I'm not too pleased with the way it came. I should've stuck with old linseed finish. I tried a new Minway color mix that I didn't like at all. So I decided on going to an old Minwax walnut stain but it didn't take well to the new crap well. After 10 or so redo's and coats it's not great but not horrible. I lost patience on this project.
Not a fan of brass either. Kept the case hardened on the lock and everything else went to a satin black cerakote.

 

[WileyX585]

 

[upstatejoe]

a couple of Marlin 39As 1951, and 1982 model;

 

[tgenec86]

Latest Giggle Stick in the collection. Ruger Precision Rifle, 6.5 Creedmoor, Vortex Strike Eagle 5-25X56 scope, Anarchy Alpha grip, and a longer - lower bolt and acorn. Just getting started, but so far so good. The target below was getting the scope leveled and dialed. 100 yards so nothing "astonishing" but it puts them in pretty damn well. The tape covered rounds were the first three after a few tweaks. high right was #4 shot after a few clicks, then the last two were where they belong. MOA precision target meant for zeroing, so that red dot is the size of a dime. Last upgrade is a much nicer bipod. Just picked up a sweet AccuTac PC-5 on EuroOptic at a nice discount. Didn't run a target out, but hit 10 of 10 on the 5" steel disc at 300 yards. Just getting into distance so it feels good.

 

[REF]

Latest Giggle Stick in the collection. Ruger Precision Rifle, 6.5 Creedmoor, Vortex Strike Eagle 5-25X56 scope, Anarchy Alpha grip, and a longer - lower bolt and acorn. Just getting started, but so far so good. The target below was getting the scope leveled and dialed. 100 yards so nothing "astonishing" but it puts them in pretty damn well. The tape covered rounds were the first three after a few tweaks. high right was #4 shot after a few clicks, then the last two were where they belong. MOA precision target meant for zeroing, so that red dot is the size of a dime. Last upgrade is a much nicer bipod. Just picked up a sweet AccuTac PC-5 on EuroOptic at a nice discount. Didn't run a target out, but hit 10 of 10 on the 5" steel disc at 300 yards. Just getting into distance so it feels good.
View attachment 286204
View attachment 286205

I had one with Vortex glass on mine as well. Second time out with it, was shooting 1000 yds like I knew what I was doing and I have absolutely no experience in long range shooting. 8” plate at 500 yds was almost boring it was so easy. They are awesome rifles for a stock precision gun.